Independent reference. Not a government website. Guidance, not engineering advice: confirm with your fire marshal.

Florida · city · ERRCS / BDA requirements

ERRCS and BDA requirements in Fort Lauderdale, Florida

Fort Lauderdale Fire Rescue tests buildings for public safety radio coverage and requires a BDA where coverage falls short. The city lists the same exemptions as state law. It has cited dozens of high-rises since the January 1, 2025 deadline.

Last verified Updated Confidence medium6 sourcesChangelog

Guidance, not engineering advice. Rules on this page come from the documents listed under Sources. Confirm with Fort Lauderdale Fire Rescue, Fire Prevention Bureau before you design, permit or test a system.

Who must comply

State rules apply here too. See Florida statewide rules.

RuleEffectCitationSource
During a building's annual fire inspection, fire inspectors run sample signal tests in critical areas.NoteFort Lauderdale Fire Prevention Bureau pageCity of Fort Lauderdale Fire Rescue
Owners can email BDA@FortLauderdale.gov to schedule a delivered audio quality (DAQ) test, or hire a licensed BDA or fire alarm contractor for a full ERCES grid survey.NoteFort Lauderdale Fire Prevention Bureau pageCity of Fort Lauderdale Fire Rescue
TriggerPublished value
Minimum building sizeNot published; confirm with the fire marshal
Minimum storiesNot published; confirm with the fire marshal
Height triggerNot published; confirm with the fire marshal
Below-grade areasNot published; confirm with the fire marshal
Building types namedNot published; confirm with the fire marshal
Existing buildings must retrofitNot published; confirm with the fire marshal
Compliance deadlineNot published; confirm with the fire marshal

The city page sums up the law as covering buildings over 12,000 square feet. The statute itself uses 12,000 square feet only for an exemption (under 12,000 and no underground areas) and for the re-assessment interval. See the Florida page.

RequirementValue
Minimum downlink signalNot published; confirm with the fire marshal
Minimum uplink signalNot published; confirm with the fire marshal
Delivered audio quality (DAQ)Not published; confirm with the fire marshal
Coverage, general areas90% of floor area
Coverage, critical areas99% of floor area
Critical areas namedStairwells, Elevators, Areas of refuge and egress, Fire alarm control rooms, Generator rooms, Fire pump rooms
Public safety radio bandsCity of Fort Lauderdale public safety radio system (800 MHz); Broward County public safety radio system (700 MHz)

The current city page does not list a dBm or DAQ level. The city's 2020 specification (marked as under revision) designed for -95 dBm, at least 18 dB above the noise floor, DAQ 3.4 everywhere and DAQ 4 in critical areas. Confirm current levels at BDA@FortLauderdale.gov.

Testing

TestWhat the source saysSource
Acceptance testUnder the 2020 specification, the installing contractor runs the acceptance test after sending as-built heat maps, diagrams and calibration certificates; a fire department representative may witness, and the city issues a Technical Compliance Certificate for each amplifier. The system may not be switched on before the city and Broward County radio shop inspect it.2020 specification, Acceptance Testing Procedure
Annual testFire inspectors run sample signal tests in critical areas during the building's annual fire inspection. A separate owner test schedule is not published on the city page; Broward County's annual test rule is on the Broward County page.Fire Prevention Bureau page
Five-year testNot published in the local documents we found; confirm with the fire marshal.None found
Coverage assessment intervalSet by state law: the fire marshal may require an interior coverage assessment no more than once every 3 years for an existing high-rise or an existing building over 12,000 total gross square feet, and once every 5 years for other existing buildings, with exceptions for major alterations, reported radio failures and imminent threats.F.S. 633.202(18)(c)2

Permit and inspection process

  1. Email BDA@FortLauderdale.gov to schedule a DAQ test, or have a licensed contractor run a full ERCES grid survey. Fire Prevention Bureau page
  2. If the building fails: review the results, hire a licensed contractor, submit plans for approval, install and test the BDA, then schedule a re-inspection. Fire Prevention Bureau page
  3. Give the city the owner contact details for FCC signal booster registration, which the city completes. 2020 specification, FCC requirements

Broward County's Section 118 steps (license holder approval before plan review, no certificate of occupancy until approval) also apply.

Codes and standards referenced

Code or standardEditionSource
Florida Fire Prevention Code (NFPA 1 and NFPA 101, Florida editions), in force statewide8th edition (NFPA 1, Florida 2021 edition), effective December 31, 2023rule
Florida Building Code, Broward County Edition (named on the city page)Not published; confirm with the fire marshalftl

Notes

A November 2025 Sun-Sentinel report counted 69 of the city's 484 high-rises cited for weak radio coverage, with booster systems quoted at $250,000 to $275,000 per building.

Questions people ask

How do we find out if our Fort Lauderdale building passes?

Email BDA@FortLauderdale.gov to schedule a free delivered audio quality (DAQ) test, or hire a licensed BDA or fire alarm contractor to run a full grid survey.

What coverage does the city require?

The city page lists 90% signal coverage in non-critical common areas and 99% in critical areas such as stairwells, elevators, areas of refuge, fire alarm control rooms, generator rooms and fire pump rooms.

Our building failed. What happens next?

The city's steps are: review the results, hire a licensed contractor, submit plans, install and test the BDA, and schedule a re-inspection. If you were cited after the state deadline, state law gives at least 1 year from the notice of violation to retrofit (F.S. 633.202(18)(g)).

Sources

Primary documents we read for this page. Rules change; confirm with your fire marshal (AHJ).